1973-1982 Body Mount Kit Coupe & Convertible
Our 1973-1982 Stock Style Corvette Body Mount Kits utilize original style hardware and rubber bushings for original finish and ride qualities.
When pulling your Corvette's body off of the frame, be sure to save the original body mount shims and to record where they were found. Frames were originally measured at the assembly plant and the correct amount of shims were taped down with masking tape at each body mount. You will need to match the number of shims, so that undue stress is not placed on your Corvette's body. Always check door alignment and don't over-tighten mount bolts.
Kit includes. All bolts, large washers, flat washers, top and bottom rubber mounts, square cover washers, and shims.
Also known under these part numbers: (For reference only)