1968-1971 C3 RetroSound RetroRadio - Chrome
If you want your Corvette’s dash to stay original but finally sound like it belongs in this decade, this RetroSound RetroRadio is the upgrade you need. It keeps the classic push-button and knob look your C3 interior deserves but behind that vintage face it’s loaded with modern tech. You get Bluetooth 5.0 for easy streaming, an included mic for hands-free calls, AM/FM RDS with presets, and an aux input for wired devices. The built-in 275-watt peak MOSFET amp delivers clean power and real volume without needing an external amplifier, so your music is crisp even with the windows down. And because nobody wants a radio that sits crooked or looks “aftermarket,” the adjustable InfiniMount brackets let you dial in shaft depth, width, and face position for a flush install that looks like it came that way from day one. No modifications required for 1968-1971 Corvettes, just a smarter sound system that respects the car.
- Fits 1968-1971 Corvettes with no modifications required
- Retro-style radio with classic push-buttons and knobs for a factory-correct dash look
- Bluetooth 5.0 wireless streaming plus included microphone for hands-free calling
- AM/FM RDS tuner with 30 presets and selectable tuning regions (USA/EUR/AUS/JAP/RUS)
- Built-in 275-watt peak MOSFET amplifier, 18 watts RMS x 4 channels (TrueRating) for clean, strong sound
- Aux input for portable devices and wired audio sources
- Adjustable InfiniMount brackets for proper shaft depth, width, and flush, factory-like fit
- Non-volatile memory saves settings after shutdown
- Chrome finish with chrome knobs and trim
- Assembly required
- Manufacturer backed 1-year warranty
- AM tuning range: 530-1710 kHz
- FM tuning range: 87.5-107.9 MHz
- Antenna terminal: External antenna connector
- Usable sensitivity: 12.5 dBf
- Selectivity: 75 dB @ 400kHz
- Signal to noise ratio: 62 dB (Stereo), 67 dB (mono)
- Harmonic distortion @ 1 kHz: 0.8% (stereo), 0.5% (mono)
- Separation: 32 dB @ 1kHz
- Frequency response: 30-16,000 Hz
- Dimensions (radio body): 3.96”W x 1.98”H x 4.30”D
- Power requirements: 11.5-14.4 volts
- Current consumption (during operation): Max. 15A
- Current consumption (car off): 3.5ma
- Output power (@ 14.4 volts @ 4 ohm @ 1% THD): 18x4 watts RMS 40x4 max power
- Output impedance: 4-8ohm
- AUX 1 input (AUX cable length, 8”): >300 mV / 6 kΩ
- EROM: Non-volatile memory
Also known under these part numbers: (For reference only)