1949-1972 Rear Quarter Section of Floor Pan Half RH Body Panel
This is a patch panel that will lay down in your current floor pan. It can either be riveted in our welded in. Fitting and welding will be required.
Although much easier to replace if the body is removed, this panel is designed to cover more forward surface area than our regular sized battery tray repair panel. 20 gauge thick.
This panel does not have the outer lip that is bolted to the heater channel. The lip on the inside towards the tunnel is also shorter so this panel is not meant to replace the entire rear quarter section. It is intended as a patch panel for the commonly rusted out area under and around the battery.
Approximate Dimensions 17 1/4" x 25 3/4"
Please Note: Upon receipt, all body panels must be checked for fit. The nature of vintage cars is that there is normally some fitting, grinding or filling necessary to make new parts fit older and perhaps modified cars. This is normal and is not considered a valid reason to return a part.
Parts which have been modified or painted by the customer or their body shop are not eligible for return. If you are employing a body shop or paint shop, please make them aware of this.
These Replacement Vintage Air Cooled VW sheet metal panels are quality replacement parts produced by companies worldwide. These parts are delivered to us and then to you using ships, trains, trucks and local carriers. Scratches in the rust preventative paint (not considered primer) and minor dings are not unusual and cannot be prevents. Minor flaws are not considered damaged product.
If you have questions, please call prior to ordering. We will be glad to assist you in finding the proper parts for your VW.
Note: Minor repair may be required on some panels.
Also known under these part numbers: