1961-1967 Extra Capacity 14.5 Gallon Fuel Tank
This gas tank fits in like the original but has a larger capacity and will hold 2.5 more gallons of fuel. Less stops at the Gas Station.
Requires a special Gas Cap
Measurements
29” long
16.5” wide
11” high
Important Tech Note !
All fuel tanks are manufactured with a sprayed-on interior rust inhibitor. This lining must be removed prior to the installation of your new tank. Failure to do so could cause your carburetor or fuel injection to clog up when gasoline dissolves the preservative and it passes into your vehicle’s fuel system.
Here is the method we employ to prep a fuel tank prior to installation:
• Close off tank openings with rags and duct tape
• Add a cleaner such as Carburetor Cleaner, Acetone, or MEK (Methyl Ethyl Ketone)
• Caution – No Smoking or Open Flames nearby.
• Add some small metal parts such as nuts, bolts or washers, then shake and rotate tank. This causes the preservative to break down and dissolve.
• Pour out and repeat until the cleaner drains out clear. Dispose of the used cleaner properly.
• Remove rags, tape and metal parts. Allow tank to dry and your tank is ready for installation.
Also known under these part numbers: (For reference only)
- 1101ALS
- 113 201 075AB16
- 113-201-075
- 11320107516
- 95-2004-B