Call Center Closed | 866.350.4540
You are just $149.99 from Free Shipping within the contiguous U.S.

1997-2013 Corvette ADDCO Front Sway Bar Kit 1-3/8 35mm Solid Metal

  • Photos
  • Videos
  • Documents
product image
Brand Logo ADDCO
Part #: 617-207
Availability: In Stock - Ships today if ordered by 3 PM CT
Only 1 Left, Order Soon!
Fits Years:
  • 1997-2004
  • 2005-2013
This item will qualify your cart for Free Basic Domestic Shipping. Additional shipping charges may apply for oversize items.
Prop 65
  • Description
  • Technical Tip

1997-2013 ADDCO Front Sway Bar Kit 1-3/8 35mm Solid Metal

Front Sway Bar Kit, 1997-2013, 35mm Solid of 1-3/8 Inches

Our Corvette Performance Front Sway Bars are the most cost effective performance handling upgrade you can make to your 1997-2013 Corvette. Our heavy-duty T1 design will improve upon the factory handling on your C5 or C6 Corvette without sacrificing ride comfort. Solid core design for minimum deflection and maximum control. Excellent choice for aggressive autocross and track use.

Engineered for race track quick handling, this kit will take your Corvette's handling to the next level. You will immediately notice quicker response to steering input with less body roll while cornering. Urethane bushings are included to more effectively secure the Sway Bars to your Corvette's chassis. Adjustable race-type Heim Joint End Links connect the Sway Bars to the Control Arms. Front and Rear Sway Bars are sold individually, however we highly recommend that both be installed for balanced handling and optimum results.

Tech Note: Your satisfaction guaranteed by ADDCO's Limited Life-Time Warranty.

  • Complete Kit Including Hardware

Also known under these part numbers: (For reference only)

  • 052582422862
  • 2286
  • 25-360577-1
  • K2-286-0U

The Problem:

Let’s face it, most decisions made by the automakers are based on one factor – cost. Without a doubt, it’s less expensive to manufacture and install smaller anti-sway bars, or in some cases, leave them off completely!


Your stock suspension does an adequate job in most situations. Where you may run into a problem (no pun intended) is when you need to make a sudden lane change to avoid an accident or when you find that curve in the road is a little sharper than you thought.


As your vehicle begins to turn, the body will ” roll” transferring weight to the outside wheels. This causes the front end to “plow”, or what is technically known as understeer. The result – your vehicle wants to keep going straight and you’re out of control!


The Solution:

With the addition of a set of  our ADDCO anti-sway bars, body roll and understeer will be greatly reduced resulting in a safer, more balanced suspension.




Neutral Steer

The front and rear of the vehicle will drift an equal amount and you will end up close to the starting point (actually, you will end up a little further out since the front and rear are drifting the same).



Front tire drift causes the vehicle to refuse to turn as sharply as the direction of the wheels are pointed. If the wheels and the throttle are held steady, the vehicle will make an ever widening circle.



Rear tire drift is greater than that of the front and the rear tends to “spin out”. The vehicle will end up closer to the center of the circle because the rear tire drift changes the direction inward.


Bigger is NOT Always Better

Even a small increase in bar diameter provides a major increase in anti-sway bar effectiveness. Play it safe and stick with ADDCO’s recommendations to achieve the level of handling you desire.