Type the code from the image
Reproduction Door Seal, 1990-1996 All Models, Right Side
This seal is an extrusion, or a long extended piece of the same profile that has molded ends. This is how they were made originally; the molded ends where of a bigger shape to fit and fill at the upper ends of the door. This piece is 82" long, has 25 blue push in pins to help hold in place, very little adhesive is needed. The front molded piece is about hand sized and tucks under the door panel and is held in place with 2 phillips head screw. Some adhesive is needed here. At the rear of door, again it tucks in under the door panel and is held on with 1 phillips head screw and some adhesive.
Note: In many cases, we offer a choice of quality levels to best match your restoration target or budget. Please reference below to better understand these levels. OEM - These parts are sourced from the Original Equipment Supplier and are the most original that you can find. These items are often in short supply or may have been discontinued by the manufacturer and may no longer be available. REP - These are Reproductions of original parts and offer the closest appearance and fit to the factory-installed parts. VAL - Our Value Line parts offer an economical solution to owners seeking to restore or repair their everyday driver. These parts will function as original, but may have a slightly different appearance. They are generally offered at a lower retail price to help owners' budgets go further.