1984-1996 C4 Reconditioned Rear Wheel Spindle Upper Control Rod
If your upper control rods are bent or have sustained other damage, it can cause misalignment, wheel hop, or other driveability issues.Tighten up your ride with this Reconditioned 1984-1996 Rear Wheel Spindle Upper Control Rod. This rod has been thoroughly reconditioned and is a direct fit replacement that requires no modifications for installation.
This control rod connects the upper portion of the rear spindle knuckle to the spindle control rod bracket attached to the chassis. The overall length from end to end of this control rod is approximately 13". Due to the reconditioned nature of this item, paint finish may vary from image shown.
- Fits 1984-1996 Corvettes
- Fits LH (Driver's) or RH (Passenger's) Side
- Reconditioned
- No Core Charge
- Fits Upper Only
- Approximately 13" Total Length
- Improve Traction
- Better Driveability
- Improve Alignment
- Control Rod Bolt at Spindle Rod Bracket Torque: 63 lb. ft.
- Control Rod Nut at Knuckle Torque: 140 lb. ft.
NOTE: In an effort to continue the flow of replacement Corvette driveline and chassis parts that are discontinued by GM, we occasionally offer reconditioned used parts. These parts are cleaned and inspected to ensure they will perform properly in service. Some parts also include the original bushings, cushions, u-joints, etc. that are deemed to be serviceable but may be replaced with new components if you choose prior to installation (new components not included).
Also known under these part numbers: (For reference only)
- 10098145
- 16501985
- 400023
- 69327W