1963-1972 DeWitts Radiator Aluminum Manual Transmission Black Ice
Improve the cooling capacity of your 1963-1967,1968-1972 Corvette in the original core support with no modifications! Our 1963-1967,1968-1972 Aluminum Direct Fit Manual Transmission Black Ice double row radiator is offered as an alternate to the original plate type (941) aluminum radiator. This Direct Fit unit uses many of the same original parts used in the factory design, including the inlet and outlet tank.
The Black Ice Coating is a special two part epoxy paint. It is applied in a spray and adheres to the aluminum and will not ever flake or peel off. It is s semi-gloss finish that will give the radiator the look of an original copper/brass unit. The total thickness of the dried product is on .002" thick and it will not affect the cooling performance whatsoever.
Made in USA
- 4100 BTU Rating
- 25% Greater Cooling Capacity Over Brass Copper Replacements
- Fits 1963-1967 ALL w/327 Engine
- Fits 1968 327 Engine w/o Air Conditioning OR Automatic
- Fits 1969-1972 350 Base Engine w/o Air Condition OR Automatic Transmission (Incorrect For L46 and LT1 Engines)
- 18.5" Wide Cooling Core Width
NOTE: Our Direct Fit Aluminum Radiators are designed to improve cooling capacity over the original equipment aluminum or brass/copper units and fit properly within the various core supports without modification. Always confirm the size (core width) of your existing radiator as we see many Corvettes with non-original core support/radiator combinations or engine swaps that lead to incorrect replacement radiator selection. The radiator is but one of many components in the cooling system and its efficiency is often compromised by the lack of proper hood, core and radiator seals, incorrect fan or shroud combination, fan clutch/ thermostat and circulation issues, or even ignition timing. If you have questions, please feel free to contact us.
Also known under these part numbers: (For reference only)
- 32-1239063M
- 1239063M
- 242241