1963-1967 Corvette Convertible Windshield Pillar Post Weatherstrip Seal Retainer

Parts You Will Need

• 

  1963-1967 Convertible Windshield Hinge Pillar LH Weatherstrip Seal

• 

  1963-1967 Convertible Windshield Hinge Pillar RH Weatherstrip Seal

Parts We Recommend

• 

  Weatherstrip, Interior and Underhood Utility 4 Piece Tool Kit

• 

  Permatex Super Weatherstrip and Gasket Black Adhesive 5 oz Tube

• 

  Permatex Ultra Black Silicone High Temperature Sealant 3.35 Oz Tube

• 

  Grease Weatherstrip Preservative and Brake System Grease, 5.3 oz

1963-1967 Convertible Windshield Pillar Post Weatherstrip Seal Retainer

Accurate correct reproduction 1963-1967 Convertible Windshield Pillar Seal Stainless Steel Retainer with Screws, Each. 

Make your 1963-1967 Convertible Windshield Pillar Weatherstrip replacement an easier task with a new Retainer and  Flat Head Screws. Measures approximately  17 inches long, 15/16 inches wide and has correct 5.25 inch hole spacing.

Stop pesky air leaks between your door and the windshield post by upgrading your 1963-1967 Corvette Windshield Pillar Post Seals.

Our 1963-1967 Windshield Pillar Post and Lower Hinge Weatherstrip fits at  the ends of the windshield and extends down into the door hinge area forming a gutter to channel water away from the interior.

This retainer holds your weatherstrip to the pillar post.

• Screws included (4)
• 2 required

Also known under these part numbers: (For reference only)

• 632212
• 686420044260