1962 Dash & Forward Lights Wiring Harness
1962 Dash including Forward Lights Wiring Harness. You will also need the headlight bucket extension wiring harness to complete this area of your Corvette. See PARTS YOU WILL NEED tab for correct harness.
Our Original Design Series™ wiring harnesses are manufactured exactly as the wiring was made when your Corvette left the factory in St. Louis. These harnesses are made to the exact O.E.M. (original equipment manufacturer) specifications, using the original factory blueprints, and are factory-correct in every way. These are full-assembled, ready to install, “plug & play” accurate reproduction wiring harnesses. You will NOT have to cut any wires, crimp any terminals, or make any modifications to these harnesses when installing them in your 1962 Corvette.
A commonly asked question and a much needed answer is "What does this harness" connect to?
1962 Corvette Dash Including Forward Lights Wiring Harness Connects to:
- Ammeter Gauge (passenger side terminal)
- Brake Light Switch
- Cigarette Lighter (power feed terminal)
- Cigarette Lighter Light Connection
- Clock
- Courtesy Light Harness Connection
- Courtesy Light Switch (driver & passenger side)
- Front Parking Light Assembly Connection (driver & passenger side)
- Fuel Gauge Terminal (driver & passenger side)
- Fuse Block
- Ground (to heater control plate)
- Ground (to driver side valve cover bolt)
- Headlight Dimmer Switch
- Headlight Extension Harness Connection (driver & passenger side)
- Headlight Switch
- Heater Switch
- High Beam Light
- Horn (driver & passenger side)
- Horn Relay
- Horn Switch Connection
- Ignition Switch ("ACC"terminal & "IGN"bridge terminal)
- Instrument Cluster Grounds
- Instrument Lights
- Radio
- Rear Body Harness Connection
- Temperature Gauge (driver side terminal)
- Turn Signal Flasher
- Turn Signal Light (driver & passenger side)
- Turn Signal Switch Connection
Also known under these part numbers: (For reference only)