1986-1988 Manual 4+3 Shifter Surround with Power Seats
Restore a factory-fresh appearance to your 1986–1988 C4 Corvette console with this reproduction 4+3 manual shifter surround plate featuring correct power seat graphics and overdrive switch in the shift knob.
The shifter surround console plate on a 1986–1988 C4 Corvette is one of the most handled and most visible interior pieces in the car. Original plates crack, fade, and wear — and a damaged surround with incorrect or missing graphics pulls the entire console area down. Finding a correct replacement for the 4+3 manual with power seat graphics and the overdrive switch in the shift knob is a specific fitment that demands the right piece.
This reproduction shifter surround console plate is manufactured to GM specifications for a precise fit and factory-fresh appearance. Correct finish, correct graphics, and correct configuration for 1986–1988 C4 Corvettes equipped with the 4+3 manual transmission and power seats. On this plate the overdrive switch is located in the shift knob — not on the console plate. Confirm your shift boot mounting hole dimensions against the underside measurements below before ordering to ensure correct boot fitment.
Fits the Following Corvette Models:
1986–1988 C4 Corvette Coupe — 4+3 Manual Transmission with Overdrive Switch in Shift Knob and Power Seat Graphics Only.
Features / Benefits:
- Reproduction shifter surround console plate for 1986–1988 C4 Corvette
- Correct for 4+3 manual transmission with overdrive switch located in shift knob — not on console plate
- Correct power seat graphics for proper appearance
- Manufactured to GM specifications for precise fit and factory-correct finish
- Correct finish and graphics reproduced to original specifications
- Confirm shift boot mounting hole dimensions against underside measurements before ordering
- Easy installation at original mounting locations
- VW reference part number not provided
Material / Finish:
Reproduction plastic construction with correct finish and factory graphics reproduced to GM specifications.
Dimensions:
Overall: 10½ in. wide x 18¾ in. tall
Shift boot mounting hole - Front side to side: 2 13/16 in.
Shift boot mounting hole - Rear side to side:: 2 15/16 in.
Shift boot mounting hole - depth: 7 15/16 in.
Because Details Matter:
The console is the command center of the C4 driving experience — and the shifter surround frames all of it. A cracked, faded, or incorrect plate with missing graphics tells the wrong story in an otherwise sorted interior. This reproduction piece restores the correct finish, correct graphics, and correct configuration so the console looks exactly the way it did when it left the factory. Measure your shift boot mounting holes against the dimensions listed before ordering — the difference between a correct fit and a frustrating return is one measurement.
Please Note: Some late 1985 C4 Corvettes were built with the 1985–1988 style surround plate with the overdrive switch in the shift knob rather than on the console plate. If your 1985 Corvette has the overdrive switch in the shift knob this is the correct console plate. Confirm your switch location before ordering.