1966 C2 Restoration Decal Set - 350 Horsepower with Steel Wheels
Your Corvette deserves nothing but the best, and this top-tier restoration decal set is here to assist you in reviving that genuine, factory-fresh appearance. Within this meticulously curated kit, you'll discover a variety of period-correct decals to transform your Corvette into an absolute show-stopper. Please note that this set excludes decals related to engine codes, air conditioning, expansion tanks, or suspension components.
Some of these decals require the application of trim adhesive for proper installation, which is not included. Additionally, certain decals call for a water-based application method, with instructions provided in the "Technical Tip" tab above.
Immerse yourself in the authentic charm of your Corvette, down to the tiniest detail. These decals have been expertly designed to faithfully replicate the original look and feel, injecting a sense of nostalgia and originality into your cherished C2. When it comes to restoring your beloved classic, don't compromise on quality. Place your trust in our Corvette restoration decal kit and let your vintage beauty shine once again.
- Correct for 1966 Corvettes
- For 350 Horsepower Cars with Steel Wheels
- 7 Piece Set
- Correct OE Appearance
- Mostly Peel & Stick Installation
- Some Decals Require General Trim Adhesive for Installation (Not Included)
- Some Decals Require Water Based Application
- Accurate Reproductions
- Officially Licensed by GM
Set Includes:
- Positraction Caution Decal (1)
- Jacking Instructions Decal (1)
- 350 Horsepower Valve Cover Decals (2)
- Oil Filter Canister Instructions Decal for PF-141 Filters (1)
- Tire Pressure Decal (1)
- Small Block Harrison Radiator Foil Tag (1)
Also known under these part numbers: (For reference only)
- 262515
- 3745926
- 3826484
- 3863148
- 629165
- 63JKCV-3
- 686420055082
- DC0070
- DC0130
- DC0299
- DECAL 30
- JKG-1
INSTRUCTION FOR APPLYING WATER SOLUBLE DECALS
1. Immerse decal in a tray of lukewarm water. Leave it submerged in water for about 1 to 2 minutes.
2. Allow sufficient time in the water and gently slide the decal a little to make sure it is loose.
3. Slide the decal over the paper edge about 1/4 inch. Gently slide it onto the surface on which you wish to place it.
4. If you are applying decals to an engine, it is best to let dry overnight and also avoid freezing temperatures.
5. Make sure the area the decal is to be applied to is free of grease, oil, dirt, etc. If it is new paint it is best to scuff up the surface a little to take the extreme gloss off so it will stick well.
6. After the decal is dry (at least 24 hours) a thin coat of clear shellac will help preserve the decal and keep it from flaking off. This is not necessary but merely helps preserve it and seal the edges.
7. If the decal flakes off in a short time, chances are the surface to which it was applied was not prepared correctly (as described above) or engine was operated too soon after applying.
8. Due to engine heat, oil and dirt - the life of the engine decals is somewhat short depending on how much you drive, etc.