Air Cooled VW 1967 Beetle Sedan or Convertible Complete Wiring Harness Kit

Parts You Will Need

• 

  1950-1979 60 Piece Fuse Kit

• 

  1967-1978 Fuse Box 10 Fuse Type with Cover

• 

  1961-1967 8 Fuse Type Clear Fuse Box Cover 111937555A

• 

  1961-1979 Fuse Box Hold Down Clips 8 and 10 Fuse Boxes

• 

  1967-1978 Fuse Box Cover 10 Fuse Type

Parts We Recommend

• 

  1950-1979 Back-up Light Switch on Transmission 211941521

• 

  1954-1967 Ignition Lock Switch w/ Keys

• 

  1963-1979 Interior Light Single Pin Switch on Door Jamb 113947561

• 

  1967-1968 Flasher Unit 9 Prong 12 Volt 211953227B

• 

  1967-1979 Headlight Dimmer Relay 5 Prong 12V 25/25A

1967 Beetle Sedan or Convertible Complete Wiring Harness Kit

Does your wiring harness look like this? If so, it's time for an upgrade!

• Exposed wire core
• Attempted splice "repairs" using poorly affixed, hand crimp connectors & clips
• Electrical tape covering exposed copper wire
• Burnt wiring caused by a short-to-ground
• Exposed copper wire caused by flexing old, brittle insulation
• Cut-off and missing terminals and connectors
• Rusted fuse block terminals
• Wires tapped into fuse block to circumvent a problem or to add an accessory

Eliminate your pesky electrical problems with this 1967 Beetle Complete Wiring Harness Kit! No more risk of fire and electrical shorts from old cracked and spliced wiring. Each harness is made from original wiring loom schematics and is factory color coded for a simplified installation process. Each kit arrives at factory length and is pre-terminated with OEM AMP terminal ends. Now you can wire your VW from headlights to taillights.

Made in the USA!

• Fits 1967 Standard Beetles
• Fits Sedans (With or Without Sunroof)
• Fits Convertibles
• For US SPec LH Drive Cars
  
• Factory Color Coded
• Made From Original Wiring Loom Schematics
• Factory Length Wiring
• Pre-Terminated
• Compatible with 12 & 6 Volt Systems
• OEM AMP Terminal Ends
  
• 10-Fuse Style Fuse Box Not Included
• Battery Cables Not Included
• Relays Not Included
  
• Instructions Included

Kit Includes:

• Main Harness (1)
  
• Left Front Harness (1)
• Right Front Harness (1)
• Dome Light Harness (1)
• Taillight Harnesses (2)
• License Light Harness (1)
• Loose Wires & Sub-Assemblies (20)
• Headlight Socket Housings (2)
• Wire Grommets (5)
• Shrouded Wire Connectors (5)
• Shrouded T-Wiring Connectors (3)

NOTE: The wires that are attached to the turn signal switch are not included with the harness. Those wires are part of the switch. The battery ground cable, the battery positive cable (along with the supply wire that attaches to the voltage regulator) and the transmission ground strap are not included.

Also known under these part numbers: (For reference only)

• WK-113-1967