1956-1957 Beetle Convertible Complete Wiring Harness
Does your wiring harness look like this? If so, it's time for an upgrade!
- Exposed wire core
- Attempted splice "repairs" using poorly affixed, hand crimp connectors & clips
- Electrical tape covering exposed copper wire
- Burnt wiring caused by a short-to-ground
- Exposed copper wire caused by flexing old, brittle insulation
- Cut-off and missing terminals and connectors
- Rusted fuse block terminals
- Wires tapped into fuse block to circumvent a problem or to add an accessory
Eliminate your wiring harness problems with this complete kit. No more risk of fire and electrical shorts from old cracked and spliced wiring. This US Spec LH Drive kit will wire your 1956-1957 Beetle Convertible from headlights to taillights.
1956-1957 Beetle Convertible Complete Reproduction Wiring Harness Kit. Wiring harness kit is an exact reproduction of original German wiring looms. All wiring is included as per the official factory wiring diagram and color coded to original specifications. This kit is perfect for the discriminating restorer.
You will receive the main harness, front harness set, miscellaneous harness assemblies and dash wires. You will also receive connectors, headlight plugs and wiring grommets.
This kit uses the 4 + 2 fuse boxes, with interior light above rear window and uses solder terminals. For Beetles without semaphores.
A detailed instruction manual, included in each kit, makes installation as simple as possible.
Fuse Box and Battery Cables are not included. See PARTS WE RECOMMEND and PARTS YOU WILL NEED tabs for additional items to complete and enhance your Beetles wiring harness installation.
MADE IN THE USA
Also known under these part numbers: (For reference only)