1997-2004 C5 Corsa Sport Cat Back Exhaust w/ 3.5" Tips & X-Pipe
This 1997-2004 C5 Corsa Sport Cat Back Exhaust with 3.5" Polished Tips & X-Pipe features their exclusive, patented, Reflective Sound Cancellation (RSC) Technology which provides all of the bold sound at idle and acceleration while eliminating the annoying drone or resonance at cruise. With Corsa’s RSC Technology, you can give your Corvette a big voice without sacrificing your driving pleasure.
Only Corsa can deliver the bold sound and performance gains you want, but without the annoying drone while on the highway. The Corsa Sport produces the perfect roar on demand for your C5 without the need for active valves and couple it with performance gains and technology to create the driving experience you crave.
Made in the USA!
- Fits 1997-2004 Corvettes
- 3.5" Polished Quad Round Angle Cut Tips
- 2.5" Nonrestrictive System Design
- X-Pipe Reduces Back Pressure & Smooths Air Flow
- Maximizes Airflow & Improves Performance
- Horsepower: +10*
- Torque: +11*
- Increased Air Flow: 47%*
- 304 Stainless Steel Construction
- Distinct Rumble at Idle
- Aggressive Sound Through the Gears
- No Interior Drone at Cruising Speeds
- Bolt-On Installation - No Welding
- No Modifications Required
- Instructions Included
- Manufacturer Limited Lifetime Warranty
NOTE: Exhaust Systems that have been installed or modified may not be eligible for a return, please call our sales staff at 866-350-4540 for more information.
*NOTE: Actual performance results are not guaranteed and may vary.
Also known under these part numbers:
Let our professional installers install this item for only $150.00
Mid America Motorworks offers installation services for a variety of restoration and aftermarket Corvette products. Our team is highly experienced in skilled, professional installation – let us do the hard work for you! Getting your Corvette back on the road or upgrading it to your personal taste has never been easier.
The Installation & Restyling Center is open:
- Monday through Friday, 8 am to 5 pm CST
- Saturday 8 am to 4 pm CST by appointment
- Sunday by appointment
Relax and enjoy the MY Garage Museum and Retail Store while your upgrades are made, or on more involved projects, use our loaner vehicle, which is available on a first come first served basis. We can also provide assistance with booking local hotels at our corporate discount rate if you plan to stay here in Effingham, IL for a few days.
While under our care, your Corvette will be stored in a secure, temperature-controlled location, giving you peace of mind until you’re ready to take it back home. When your installation is complete, we also offer detailing services to get your Corvette ready to turn heads!
Schedule your Installation today by calling 800.500.1500 or emailing firstname.lastname@example.org
Back to top
Stock or Aftermarket Exhaust: Which Exhaust is Right for Your Corvette?
Corvette exhaust comes in a variety of options. From stock to keep your Corvette looking showroom-new to aftermarket to add more performance, exhaust can be as varied as the Corvette community. Mid America Motorworks takes a closer look at stock and aftermarket exhaust options to ensure your Corvette is running the system that's right for you.
Exhaust Manifolds vs. Headers
Corvette manifolds and headers are both designed to channel exhaust away from the cylinder heads and eventually out the back of the vehicle. Manifolds are made with a single piece that services all cylinders, while headers give each cylinder a dedicated pipe to eliminate back pressure.
- Price – Thanks to their utilitarian design, manifold cost is relatively low
- Sound Reduction – Thick walls absorb some of the sound as exhaust gases collect inside the manifold
- Original Fitment – Manifolds are stock on Corvettes and therefore are an easy bolt-on item
- Sacrificed horsepower and torque – The utilitarian design was built for cost savings, not performance
- Designed for ultimate flow
- Designed for prime backflow pressure
- Control where you want your power increase (high end or low end)
- Add coatings to control heat dissipation
- Lighter weight than manifolds
- Increased horsepower and fuel efficiency
- Sound Decibel Levels Are Higher – may be too loud for cruising
- Engine Compartment fitment may be tighter
H-Pipes vs. X-Pipes
The crossover pipe is the heart of any performance exhaust system. Bolted to the center of your Corvette, it balances exhaust impulses from both sides for smooth exhaust flow and a more efficient engine. Corvettes come stock with H-Pipes and can be upgraded to X-Pipes, but what's the difference?
An H-Pipe is shaped like the letter H, and relies on exhaust expansion to balance the cylinder banks. A section of tubing in between the main pipes provides an area for gases to expand into during exhaust pulses. Only a small amount of exhaust flows from one stream to the other as both sides push back and forth in the center section. Gains in performance are noticed from a low RPM and give the exhaust a deeper, old American muscle car tone.
An X-Pipe is shaped like the letter X, and allows the exhaust to flow down the path of least resistance. At lower revs, turbulence is formed as exhaust gases try to shuffle past a second column of gases coming from the other side. While producing more power than the restrictive factory system, the potential gains are not seen until higher RPMs are reached. This is where an X-Pipe stands apart from the rest. Exhaust gas is pushed out harder as the engine spins faster. The X-Pipe merges the turbulence into two uniform streams, for a smooth flow to the tailpipes. Both streams keep each other up to speed, which draws even more spent exhaust out the cylinders. X-Pipes provide a boost in horsepower and a higher exotic car tone.
When Corvette manufactures design a muffler system, cost is a big factor in determining the final style. The original system will provide great looks and function properly for years of road trips. However, there is a lot of room for improvement if you choose to put on a custom muffler system. One advantage of aftermarket exhaust is that you can tailor the system to meet your needs. Be sure to consider the following:
- Decibel level – Mid America Motorworks has created an IAC Exhaust Rating Chart to help you choose the right exhaust based on tone during idle, acceleration and cruise.
- Tone – Different brands usually have distinct tones. The tone that's right for you depends on your personal preference.
- Tip Number – Corvette exhaust is available in dual or quad tips.
- Tip Size – Personal preference is once again a factor in deciding muffler tip size. Tips can range from 2" to 4.5" and can alter the idle tone of your exhaust.
- Tip Shapes & Color – Complement your Corvette's exterior with custom tip shapes and polished or black finish options.
GM designed the NPP Exhaust Option to allow 2008 and later C6 Corvette owners to experience louder exhaust notes at full throttle. NPP simply refers to the option code. Mid America Motorworks has developed an NPP Bimodal Switch for 2008-2013 C6 Corvettes that allows drivers to enjoy the louder note across the full RPM band. A computer-controlled valve in the exhaust system opens during acceleration and closes during cruise. The NPP Exhaust switch allows you to open the valve on command with the flick of a switch.
Back to top